China China Manufacturer Supplier Rubber Lagging Drive Pulley for Belt Conveyor Machinery alternator pulley

Merchandise Description

China Manufacturer Provider Rubber Lagging Travel Pulley for Belt Conveyor Machinery 

Type Belt width(mm) Normal Diameter(mm) Size(mm)
Drive pulley 500 500 Length of the pulley is dependent on the belt width of the conveyor
650 500~630
800 630~one thousand
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~five hundred
650 250~630
800 250~one thousand
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 four hundred~1600
2000 five hundred~1600
2200 630~1600
2400 800~1600

 

1.)Pipe: seamless steel : it was precisely lower by using the flame reducing device.

two.)The sleeve & disc :it was minimize by employing the laser cutter machine precisely.

 

3.)Shaft: We selected forty five# spherical steel & sleeve and process the whole shaft so that it ensures shaft concentricity and reduction for the eccentric shaft drive. It make confident the pulley move far more stable

four.)Bearing established & bearing: large-top quality bearing which is scorching charging and bearing block are geared up internal bearing enlargement unit, so the bearing can be easily pushed to the bearing position  and it avoids the bearing damage from the beating.

Tests for the pulley

We have the skilled screening equipment for the pulley.    We require make the reducing internal tension therapies when the pulley’s endure forces exceed 80KN and we will make the static  balance inspection when the belt velocity exceeds 2.5m/s.  
And we laso make the Drum dynamic balance check for the pulley to validate the excellent top quality prior to sent to the consumer.

Packing:
Right after all the products examined then make the packing, then the products set into the warehouse to wait to send out to the consumer
Our assignments:
Exhitbition and the buyer visiting~
We also attend many sorts of associated exhibitations to know a lot more our items for the consumer. These kinds of as Canton honest, buma truthful andother minging fairs.
Our business and products get the customer approve and several consumer vist us and make the orders for us.

Business certification &honor
We have the ISO 9001 certification The merchandise have received a variety of patents. For instance: Logos, patents,ects.

Following sale services
We provide the customer ideal soon after sale companies, and we remedy the troubles any time.

The company introduction:
 HangZhou CZPT conveying Machinery Co.,Ltd was established in 2005.      
It’s registered capital is eleven.68million CNY and It is personal joint-stock company. Our major products are cnoveyor roller,loafer,frame, pulley,belt and belt conveyor program for TD75 ,DTII,DTIIA,CEMA ects.
we has large lathes, numerical control, double urgent equipment, double welding equipment, double boring lathe, milling equipment, sawing machine and so on. The items have received a variety of patents. We can produce more than 1 thousand rollers and ten pulleys for each working day.
We have the professionalQC dept. to maintain the excellent top quality before the items despatched out. The items are offered to Middle East,Africa ,Australia,Europe,Southeast Asia,Russia and some other international locations and locations. We will Improve the interior management and enhance our products’ top quality continually.We will supply the greatest goods for consumers from the beginning to the conclude.

FAQ

1.Q: Your bearing sort and brand typically use? 
 A:Big ball bearing sort deep ball bearing withSRB, and according to customer’s requirements. 

two.Q: How is your Payment Time period? 
A: T/T or L/C. An additional payment time period we can also discuss. 

three.Q: Can you customize it? 
A: We support customization according to your request. 

4.Q: What is actually the MOQ? 
A: 3 piece. 

five.Q: What’s the production ability of your conveyor pulley? 
20 pcs/working day.

six.Q: What’s your roller’s lifetime?
Our pulley have a long life span with great performance and normally
make sure 30000 to 50000 hrs beneath the normal site and procedure.

US $580-38,000
/ Piece
|
1 Piece

(Min. Order)

###

Material: Carbon Steel
Surface Treatment: Electroplating
Motor Type: Frequency Control Motor
Installation: Horizontal
Bearing: Self-Aligning Ball Bearings
Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag

###

Customization:

###

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600
US $580-38,000
/ Piece
|
1 Piece

(Min. Order)

###

Material: Carbon Steel
Surface Treatment: Electroplating
Motor Type: Frequency Control Motor
Installation: Horizontal
Bearing: Self-Aligning Ball Bearings
Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag

###

Customization:

###

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows two blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the two blocks is the total tension and the force acting on the pulley is the weight of the two blocks.
This simple mechanism uses two simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are three basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The two most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than one “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than one type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are three main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have one advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which two pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to four times their force when used in hydraulic lifts.

China China Manufacturer Supplier Rubber Lagging Drive Pulley for Belt Conveyor Machinery     alternator pulley	China China Manufacturer Supplier Rubber Lagging Drive Pulley for Belt Conveyor Machinery     alternator pulley
editor by czh 2023-01-12